📱

Get Our Mobile App

Take your business learning on the go!

Download on the App StoreGet it on Google Play

The Barista Express™ Impress | Cleaning your machine: How to perform a Clean cycle | Breville NZ

Breville New Zealand1:32

Transcription

[Music]

The Barista Express Impress features an in-built cleaning cycle which should be carried out periodically. The maintenance light will automatically flash to indicate when a cleaning cycle is required.

To start, insert the one cup filter basket into the portafilter, followed by the silicon cleaning disc. Place one cleaning tablet into the center of the cleaning disk, then insert and lock the portafilter into the group head.

Before you start the cleaning cycle, make sure the water tank is filled to the max line with cold water, the drip tray is empty, and the machine is turned off. Press the one cup, two cup, and power button simultaneously and hold for three seconds.

The cleaning cycle will commence and last for approximately five minutes. The machine will beep three times and return to standby mode once completed.

Remove the portafilter and ensure the tablet has completely dissolved. If the tablet has not fully dissolved, repeat the steps until the tablet has dissolved.

Once the tablet has completely dissolved, remove the cleaning disk, then reinsert and lock the portafilter into the group head. Place a small cup or container under the portafilter and press the 2 cup button to rinse any residue.